Inhalt archiviert
Dieser Inhalt wurde am 08.05.2024 archiviert.
Meters with the MID+ function measure and store the quarter-hourly measured values in a legally compliant and tamper-proof manner. All stored measured values of the energy recording can be called up via the device display.
The raw data from the GridVis® energy recording report can thus be verified against the values stored in the meter (e.g. during acceptance by an auditor).
Fig.: Device display with energy recording
Fig.: Raw data from the GridVis® energy recording report
Verification of the raw data of the energy recording report via the device display
| No. | Meaning |
|---|---|
| 1 | Designation of the meter or measurement point |
| 2 | Measured values of the energy recording with status |
Status of the measured values
The quarter-hourly measured values are invalid if:
- The last time synchronization was more than seven days ago (unsynchronized data).
- No time is set (invalid data).
- The device was switched off within the 15-minutemeasurement period (invalid data).
| Symbol | Meaning |
|---|---|
| Valid data |
| Invalid data |
| Unsynchronized data |
